#177120 - dirkwillem - Tue Dec 13, 2011 4:22 pm
Hello, Im new to GBA development and im trying to set up the devkit on Ubuntu. Problem is, I got a lot of problems with the makefile. The console gives this:
This is after a rollercoasterride of other errors, you can see the entire story here
Any help is appreciated
DirkWillem
| Code: |
| dirk@ubuntu:~/Bureaublad/GBA/DevkitAdvance/devkitadv$ sudo make
[sudo] password for dirk: rm -rf build-gcc mkdir build-gcc make stmp-gcc-link-newlib make[1]: Entering directory `/home/dirk/Bureaublad/GBA/DevkitAdvance/devkitadv' patch --strip=1 --input=gcc-3.1.patch patching file gcc-3.1/gcc/Makefile.in Hunk #1 succeeded at 2634 (offset -18 lines). patching file gcc-3.1/gcc/config/arm/t-arm-elf Hunk #1 FAILED at 80. 1 out of 1 hunk FAILED -- saving rejects to file gcc-3.1/gcc/config/arm/t-arm-elf.rej patching file gcc-3.1/gcc/dwarf2out.c Reversed (or previously applied) patch detected! Assume -R? [n] y Hunk #1 succeeded at 2103 (offset 58 lines). patching file gcc-3.1/gcc/except.c Reversed (or previously applied) patch detected! Assume -R? [n] y Hunk #1 succeeded at 3829 (offset 354 lines). Hunk #2 succeeded at 3866 (offset 354 lines). patching file gcc-3.1/gcc/except.h Reversed (or previously applied) patch detected! Assume -R? [n] y Hunk #1 succeeded at 137 with fuzz 1 (offset -9 lines). patching file gcc-3.1/gcc/unwind-pe.h Reversed (or previously applied) patch detected! Assume -R? [n] y patching file gcc-3.1/gcc/version.c Reversed (or previously applied) patch detected! Assume -R? [n] y Hunk #1 succeeded at 1 with fuzz 1. make[1]: *** [stmp-gcc-apply-patch] Error 1 make[1]: Leaving directory `/home/dirk/Bureaublad/GBA/DevkitAdvance/devkitadv' make: *** [stmp-gcc-configure] Error 2 |
This is after a rollercoasterride of other errors, you can see the entire story here
Any help is appreciated
DirkWillem