gbadev.org forum archive

This is a read-only mirror of the content originally found on forum.gbadev.org (now offline), salvaged from Wayback machine copies. A new forum can be found here.

Flash Equipment > flash 2 advance linker pinout help!

#25333 - pacman366 - Fri Aug 20, 2004 7:45 pm

I accedently ended up steping on my f2a linker, its not broken but i ended up dislogeing the color coded wires that go from the usb linker to the gba port. I need to re soder them in there rightfull spot. if someone could maby give some pin out diagram or post a picture of there f2a linker without its plastic shell on it would be a BIG help, thanks

#25344 - phonymike - Sat Aug 21, 2004 12:36 am

I thought f2a used a usb cable to connect to the gba. Do you actually have the separate cradle that you plug gba carts into? If so I can get pics of mine.

#25357 - pacman366 - Sat Aug 21, 2004 3:55 pm

Remove the plastic enclosure right below the usb port of the linker, then you know what im talking about

#25382 - phonymike - Sat Aug 21, 2004 7:17 pm

Sorry I can't help you. Re-reading your post I see you said USB to GBA port, which is the linker cable, I have the linker cradle. Just for shits and giggles here's a pic

http://www.phonymike.com/flash_advance_xtreme_linker.jpg

#25694 - pacman366 - Fri Aug 27, 2004 5:01 am

thanks for your help, but thats the flash advance extreame, i have the flash 2 advance linker ( www.flash2advance.com ), i really apresheate the troble you went though to get the pictures though, thanks, its gratifying to see a gba community with sutch deadication and support