#89053 - Draders - Thu Jun 22, 2006 10:04 pm
I purchase a Eusso UGL2454-VPR which was on the list of compatable cards (http://ralink.rapla.net/) and I got the special driver to install and everything. The problem is while following the directions on the site http://www.aaronrogers.com/nintendods/wifime.php double clicking on the wmb.exe will make it appear and dissapear right away.
The FAQ said this:
Q: When I double-click wmb.exe a screen pops up and goes away right away, do you know why?
A: It probably means your WiFiMe NIC is not inserted, not working, or does not have the WiFiMe driver properly installed.
The card works fine as a normal wifi card so it's not broken and the driver seemed to of installed fine and shows up in device manager. I also made sure the VID/PID is 1814/0201.
Did anyone else have a similar issue with this card or a different one or may know what the problem is?
#89089 - Pinesal - Fri Jun 23, 2006 1:38 am
Get the WMBfron from here http://headkaze.webpal.info/ that should simplify things.
#89107 - tepples - Fri Jun 23, 2006 3:26 am
| Draders wrote: |
The FAQ said this:
Q: When I double-click wmb.exe a screen pops up and goes away right away, do you know why?
A: It probably means your WiFiMe NIC is not inserted, not working, or does not have the WiFiMe driver properly installed. |
That answer is false. The correct answer is in the GBA beginners' FAQ.
_________________
-- Where is he?
-- Who?
-- You know, the human.
-- I think he moved to Tilwick.
#89169 - Draders - Fri Jun 23, 2006 12:18 pm
When trying to uplaod a random .nds game I downloaded I get this.
Nintendo DS - Wireless Multiboot Application - Version 1.4 BETA 1
(c) 2005 Tim Schuerewegen
Device Description = Ralink RT2560 Device
Device Hardware ID = PCI\VEN_1814&DEV_0201&SUBSYS_25601814&REV_01
Device Location = PCI bus 1, device 6, function 0
Driver Version = 1.0.0.8
Loading "DSGoo.nds"... error: could not load "header.bin"
ds_multiboot_master_init() failed
ds_multiboot_master() failed
============== STATISTICS ==============
FCSErrorCount = 51620
ReceivedSuccessCount = 63882
TransmittedSuccessCount = 0
Press any key to exit...
I have the WiFiMe folder in the data folder with all teh files "arm7.bin, arm9.bin, beacons.bin, header.bin, rsa.bin" in it.
#89172 - Sektor - Fri Jun 23, 2006 12:41 pm
That just means it can't find DSGoo.nds.
You don't need to extract wifime.zip, you can just put the zip file in the data folder and run "wmb -data wifime"
_________________
GTAMP.com/DS
Last edited by Sektor on Fri Jun 23, 2006 12:52 pm; edited 1 time in total
#89173 - Draders - Fri Jun 23, 2006 12:52 pm
Ah, ha okay I thought the frontend would of put it in the right directory but I guess not. Okay it's not "Sending multiboot beacons & waiting for authentication"
Now I'm worried, I set it to "DS Download Play" and it searched for a while and then it turned off the DS. I tried it again and same thing. Now the DS emedietly turns off after turning it on.
#89174 - Sektor - Fri Jun 23, 2006 12:53 pm
Probably a low battery.
_________________
GTAMP.com/DS
#89175 - Draders - Fri Jun 23, 2006 12:59 pm
LMAO okay the battery is dead, last thing on my mind.
#89230 - Draders - Fri Jun 23, 2006 5:35 pm
Okay after charging the DS I got the game to upload, only when the game started all I got was a corrupted logo on the top screen (like the image linked below) and a blank white bottom screen.
http://www.draders.com/misc/logo.jpg
WMB gave this as the output.
Sending multiboot beacons & waiting for authentication
Received authentication
Received association request
Uploading multiboot binaries ... 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Received de-authentication
============== STATISTICS ==============
FCSErrorCount = 108412
ReceivedSuccessCount = 232850
TransmittedSuccessCount = 9469
Thanks for all the help so far!
#89236 - tepples - Fri Jun 23, 2006 5:53 pm
You are trying to send a program not signed by Nintendo without having installed FlashMe first. What version of firmware does your Nintendo DS system have (see TakeMeOut), and what GBA slot flash equipment are you using?
_________________
-- Where is he?
-- Who?
-- You know, the human.
-- I think he moved to Tilwick.
#89241 - Draders - Fri Jun 23, 2006 6:31 pm
I think I have v2 as I got 2 bluish gray screens.
I have Passkey2.
#89275 - tepples - Fri Jun 23, 2006 11:38 pm
| Draders wrote: |
| I have Passkey2. |
In SLOT-1. But what do you have in SLOT-2?
_________________
-- Where is he?
-- Who?
-- You know, the human.
-- I think he moved to Tilwick.
#89298 - arog - Sat Jun 24, 2006 2:48 am
| tepples wrote: |
| Draders wrote: | The FAQ said this:
Q: When I double-click wmb.exe a screen pops up and goes away right away, do you know why?
A: It probably means your WiFiMe NIC is not inserted, not working, or does not have the WiFiMe driver properly installed. |
That answer is false. The correct answer is in the GBA beginners' FAQ. |
Can you elaborate?
- Aaron Rogers
http://www.aaronrogers.com/nintendods/
#89305 - tepples - Sat Jun 24, 2006 3:17 am
When you double-click a Windows command-line program, it prints a message stating that one or more arguments were missing and then stop. When the program stops, Windows closes its window, hiding the message. To prevent this from happening, open the GBA beginners' FAQ and search for the answer to the question:
Q: I've downloaded a program, but when I double-click its icon in Windows Explorer, a window filled with black opens and closes so quickly that I cannot read it. How do I use this program?
_________________
-- Where is he?
-- Who?
-- You know, the human.
-- I think he moved to Tilwick.
#89308 - Draders - Sat Jun 24, 2006 3:36 am
I had the M3 in the gba slot and then the passkey 2 in the ds slot.