#93092 - miner2049er - Sun Jul 16, 2006 11:11 pm
I have flashed a DS Phat with flashme 7, and the screen calibration tool is stuck in a loop and will not work.
I have reflashed with noflashme and flashme 7 again but the problem is still there.
Is there a known fix for this yet as I'm not the only person this has happened to?
#93106 - telephasic - Mon Jul 17, 2006 1:06 am
I've seen the recalibration loop happen on another DS Phat. It has nothing to do with the flashme as far as I am aware as it occured on a non-flashed DS.
The problem was solved by turning the DS off and checking very carefully around the edge of the screen (the gap between the screen surface and the surrounding plastic) and using a pin to clear out little flecks of dirt. One was big enough to be pressing on the screen and interfering with the calibration.
Let us all know how it goes.
#93159 - miner2049er - Mon Jul 17, 2006 8:49 am
Thanks, I'll try it tonight.
Good to know it's not related to flashme though.
#93281 - miner2049er - Tue Jul 18, 2006 8:37 am
No luck.
It's cleaned out around the screen edges and still stuck in the loop.