gbadev.org forum archive

This is a read-only mirror of the content originally found on forum.gbadev.org (now offline), salvaged from Wayback machine copies. A new forum can be found here.

DS Flash Equipment > G6 Lite + PassKey2 Problem -- Please Help! Thanks!

#103538 - slinker - Fri Sep 22, 2006 6:41 pm

I've got a g6 lite, a passkey2, and a black nds lite that I'm trying to flash with flashme, but I can't get the passkey2 to work. I previously used it with a m3 mini-sd on a different ds lite fine, so the hardware should be cool. Here's what I've done, and what I'm trying.

What I did (that seemed to work)

- Put the K2_HW04.gba on the g6
- Ran it with the program adapter and passkey2 to update it

What I'm trying now

- Put the K2_RAM04.gba on the g6
- When try to run this file, I get "CRC Error !" every time

I've tried it several times from both the root of the device, and using the software... I've even re-downloaded the the passkey2 zip file m3adapter.com.

Any suggestions?

I just need it to work once so I can run flashme! :) Where does the leading card info get stored? because, I had previously set it up for the game I'm using, but it doesn't work either... I get a white screen after the health warning.

#103689 - slinker - Sat Sep 23, 2006 9:42 pm

I found the problem. The g6 lite needs either a different firmware/software for the passkey2 in order for it to work with it. The correct version can be found here: http://www.handheldsources.com/Download.html. I upgraded the software with that one, and it worked fine.