#117002 - phantom32i - Wed Jan 31, 2007 6:49 pm
I have already flashed my DSL using flashme.nds to the new 1.7.
Is there anyware of getting the original firmware back?
Thanks
#117003 - MaHe - Wed Jan 31, 2007 6:57 pm
WRG, although a warez group, has released a tool called noFlashME Lite.
I'm not sure if I'm allowed to post the link, but I don't see anything wrong with it ...
_________________
[ Crimson and Black Nintendo DS Lite | CycloDS Evolution | EZ-Flash 3-in-1 | 1 GB Transcend microSD ]
#117015 - phantom32i - Wed Jan 31, 2007 8:10 pm
I read that noflashme does not have a recover.
Does that mean if the system shutdown while i am shorting the my ds lite is going to be messed up?
Anything i should know....
I have tried flashme a few times now... Most of the time. i had the system shut down before i got to 100% but all i do is rerun the process.
With noflashme.. can i do this?
thanks
tim
#117030 - outphase - Wed Jan 31, 2007 9:56 pm
noflashme does NOT have recovery mode. If you do not finish the install, then you do not have a working DS.
#117031 - tepples - Wed Jan 31, 2007 9:56 pm
Noflashme counts backwards from 100% down to 0%. If your DS loses power between 100% and 5%, you can recover using the failsafe code that FlashMe installed; otherwise, you're hosed.
Are you trying to unflash for warranty purposes, to make the DS appear not flashed to Nintendo repair techs? If so, you can use FlashMe Stealth instead.
_________________
-- Where is he?
-- Who?
-- You know, the human.
-- I think he moved to Tilwick.
#117076 - phantom32i - Thu Feb 01, 2007 1:35 am
you mean if i am using noflashme and i lose power around 30% I cannot use noflashme to recover. I will have to use flashme to get it up to 100% and start over the entire procedure?
#117079 - tepples - Thu Feb 01, 2007 1:46 am
If you are using noflashme, you can recover at any percentage above around 5 percent, but you will have to use the recovery code (A+B+Select+Start+Power On) with a compatible SLOT-2 card.
_________________
-- Where is he?
-- Who?
-- You know, the human.
-- I think he moved to Tilwick.
#117082 - phantom32i - Thu Feb 01, 2007 2:38 am
What are the difference between noflashme and noflashme lite?
I used to use the Supercard but now that i have a ninjads that is using slot 1. I don't like to press the select button in order to start up.
This is why I am wondering if i can flash my ds lite back to its original state. (not because of warranty purpose)
If flashmestealth can fix the "select" boot then i rather use stealth of course.
But before restore my dslite...i just want to make sure I am doing the right thing and the advantages outweigh the risk.
#117084 - chishm - Thu Feb 01, 2007 3:33 am
| phantom32i wrote: |
What are the difference between noflashme and noflashme lite?
I used to use the Supercard but now that i have a ninjads that is using slot 1. I don't like to press the select button in order to start up.
This is why I am wondering if i can flash my ds lite back to its original state. (not because of warranty purpose)
If flashmestealth can fix the "select" boot then i rather use stealth of course.
But before restore my dslite...i just want to make sure I am doing the right thing and the advantages outweigh the risk. |
Select boot is more likely a problem with the NinjaDS not correctly rejecting commands to probe for an MK2/3. The Ninja team are a bit busy with Wiinja at the moment, so I haven't had much luck getting a fix.
_________________
http://chishm.drunkencoders.com
http://dldi.drunkencoders.com
#117089 - Firon - Thu Feb 01, 2007 5:13 am
phantom32i: one is for DS Phats, one is for DS Lites.
#117119 - phantom32i - Thu Feb 01, 2007 1:33 pm
I spoke with a person at ninjads and they say 1.4 version coming out will not fix the boot either.
thats kinda sad.
#117120 - phantom32i - Thu Feb 01, 2007 1:38 pm
Does anyone know if R4 also have boot order problem?
Any opinions regarding Ninja and R4? The way it works.
Which ones would be a better solution in terms of usability.
#117132 - Diddl - Thu Feb 01, 2007 4:20 pm
I have a DS-simply (which is same as R4) and flashme7 on my NDS lite. After booting (with DS-Simply in Slot in and M3 in Slot2) always M3 starts in DS mode. Pressing Sel while booting DS simply starts automatically. From Ds simply youcan go directly in M3 GBA mode.