#40570 - NEILYOUNG - Wed Apr 20, 2005 2:21 pm
Hi everyone
I got a f2a ultra flashcard 256 and i've just purchased a wifi card linksys wmp54g..
So i think all is alright :-)
I just try to communicate to the pc with rt2560 app wmb 1 1 fixed and that's works only with the DS Paint....
No other one......I try a lot (i think all homebrew) and no way.
This screen display nintendo and i got a blank screen...
Itry to erase totally my flashcard and that doesn't work too
I follow the Aaron roger procedure so did I make a mistake ?
Could Help me plz many thanks to all and big up for this great forum
Helped you by fixing the subject formatting. You're welcome. -- mod team
#40585 - gladius - Wed Apr 20, 2005 4:31 pm
The WMP54G has different versions, only one of the versions is the correct chipset. Check if your box has a V4 after the WMP54G, if it doesn't, then you don't have the correct version. This is explained on the ralink rt2500 devices page http://ralink.rapla.net/.
#40592 - Theodore104 - Wed Apr 20, 2005 7:00 pm
Your message is a little hard to understand, but I think you're saying that dsPaint works and other programs that you've tried don't?
Programs will only work with the passthrough method if they've been specifically compiled to do so. A lot of the files around are just simple binaries, so they'll work on an emulator, but they won't work with this method.
Try some of the following; unless I'm misremembering, they should all work with the passthrough method...
http://natrium42.com/downloads/
http://www.auby.no/index.php?id=15
People usually name files that will work with the passthrough ".ds.gba", and files that won't ".bin". That's not always the case, though....
- Theo
#40597 - NEILYOUNG - Wed Apr 20, 2005 9:00 pm
okay i understand what you say my wifi card is right and so like i said
ONLY DS PAINT works
When i use f2apower writer to send files to my gba cartridge (except DS PAINT) i've got a message like this "read file 32k error game file might corrupt" (I try for example natrium's battleship or pong and some other but no way to make it work....)(some are in format file.ds.gba and other in file.bin....)
I can't send anything else except DS PAINT..
I format my card everytime in full format
I've got only one file on the flashcard
Thank for your help
#40613 - PhoenixSoft - Wed Apr 20, 2005 11:46 pm
Never type in capitals, it's very rude. Especially in a message title, it's like you're saying your message is more important than anyone else's.
#40647 - Lynx - Thu Apr 21, 2005 6:34 am
Only file.ds.gba's will work, the .bins are for emulators. Other then that, I don't know why dsPaint would work, and others not.
#40674 - Proteanruler - Thu Apr 21, 2005 12:09 pm
Are you erasing your cartridge properly?? When you attach to powerwriter, on the GBA press select + A => then press down on d-pad => then press A to erase the cartridge truly (just selecting delete in power writer does NOT work).
FYI I have tried all these demos using passme original (now I have firmware installed no longer need passme - THANKS TO COSTIS, LOOPY, DARKFADER + NE1 else involved!!!! - works a treat :)) - on 64meg F2A Ultra , on 128meg F2A Ultra => I have had absolutely no probs other than powerwriter crashing occasionally when burning (version 2.4 powerwriter does not like my flash carts but it's possible to get round it by reinstalling over the top of powerwriter each time I need to flash ds stuff - funnily enough works fine with old school GBA stuff - why it is weird I have no idea and don't care - so long as ultimately I have a way to work with it :)!)
Mr P.