#57961 - Ackman - Wed Oct 19, 2005 4:21 pm
I think that the SRAM on the G6 can be written from GBA mode, i need put a sram.bin for the passme with the new code.
the problem is that I do not know to do it
somebody can help me?
thanks
#58209 - Ackman - Fri Oct 21, 2005 5:03 pm
nobody?
#58293 - pepsiman - Sat Oct 22, 2005 11:29 am
Untested instructions for using the G6 to boot homebrew on a DS with new firmware:
add the homebrew program as a gba rom using the g6 software.
replace the savefile it creates (the .0 file) with a copy of the sram.bin padded to the same size.
Boot the G6 in GBA mode (no passkey inserted).
load the program.
insert passkey.
press and hold the button on the g6.
turn off ds.
turn on ds.
#58361 - Ackman - Sat Oct 22, 2005 10:42 pm
| pepsiman wrote: |
Untested instructions for using the G6 to boot homebrew on a DS with new firmware:
add the homebrew program as a gba rom using the g6 software.
replace the savefile it creates (the .0 file) with a copy of the sram.bin padded to the same size.
Boot the G6 in GBA mode (no passkey inserted).
load the program.
insert passkey.
press and hold the button on the g6.
turn off ds.
turn on ds. |
i will try, thank you very much again friend
bye
#58812 - Ackman - Wed Oct 26, 2005 10:31 am
I proved it and works correctly, thank you very much
bye
#58820 - monkey1987 - Wed Oct 26, 2005 2:50 pm
| pepsiman wrote: |
Untested instructions for using the G6 to boot homebrew on a DS with new firmware:
add the homebrew program as a gba rom using the g6 software.
replace the savefile it creates (the .0 file) with a copy of the sram.bin padded to the same size.
Boot the G6 in GBA mode (no passkey inserted).
load the program.
insert passkey.
press and hold the button on the g6.
turn off ds.
turn on ds. |
hello.
tomorrow i am going to trade my ds for anotherone because i have a dead pixel on it.
i also have a g6flash and a passme
but i where afraid that i would get a new ds with new firmware on it.
and i can't use my passme anymore and i can't also upgrade my firmware.
but do you think that it will also work for me?
so i could upgrade my firmware on a ds with new firmware?
and zould i use my passme for it? or do i have to buy a passkey??
i hope you can help me