#61928 - pimpmastah - Fri Nov 25, 2005 12:54 pm
Hey Guys.
First problem I got a blue DS with the new firmware, got a passme2 for Mario 64 DS EUR and a flashcard with flashme(v5) installed, but when I start up the DS I only get two white screens. What?s wrong?
Second one. I got an old DS with flashme(v1), and I started Mario Kart DS, it only showed white screen. After I turn it off and switched it on again, it was shown only blackscreens and powerled was on. Is there a way to fix it??
thx
#61930 - zxr750j - Fri Nov 25, 2005 1:37 pm
First: Even with no GBA-cartridge inserted?
Second: You've got to make a FlashMe Recovery (A+B+Select+Start) to fix the DS. Flash it with v5 and it'll work with Mario Kart.
#61933 - pimpmastah - Fri Nov 25, 2005 2:13 pm
HI.
thx for reply
First: Yes, does not matter if gba-cart inserted or not, always two white screens.
Second: Do I see right? Starting up DS and holding down the four buttons?
#61935 - pepsiman - Fri Nov 25, 2005 3:14 pm
| pimpmastah wrote: |
| First problem I got a blue DS with the new firmware, got a passme2 for Mario 64 DS EUR and a flashcard with flashme(v5) installed, but when I start up the DS I only get two white screens. What?s wrong? |
As you don't mention writing the SRAM, I'm going to assume that the problem is that you haven't written the SRAM.
This program will write the SRAM for you: http://pepsiman.pwp.blueyonder.co.uk/passme2flashme.gba
Run that in GBA mode, select ASMP, insert passme2 and reboot.
FlashMe will then start.
#61936 - pimpmastah - Fri Nov 25, 2005 3:41 pm
| pepsiman wrote: |
| pimpmastah wrote: | | First problem I got a blue DS with the new firmware, got a passme2 for Mario 64 DS EUR and a flashcard with flashme(v5) installed, but when I start up the DS I only get two white screens. What?s wrong? |
As you don't mention writing the SRAM, I'm going to assume that the problem is that you haven't written the SRAM.
This program will write the SRAM for you: http://pepsiman.pwp.blueyonder.co.uk/passme2flashme.gba
Run that in GBA mode, select ASMP, insert passme2 and reboot.
FlashMe will then start. |
Thx, but still the same. Does it matter I have a european MARIO?? On the backside of the passme is written "SM64 EUR".
#61942 - pepsiman - Fri Nov 25, 2005 4:23 pm
| pimpmastah wrote: |
| Thx, but still the same. |
Make sure you have disabled any loaders on the flash cart.
#61946 - pimpmastah - Fri Nov 25, 2005 5:34 pm
I used another card and disabled loader, now it work. Thanks alot.
#61998 - Empyrean - Sat Nov 26, 2005 9:45 am
| Quote: |
| Make sure you have disabled any loaders on the flash cart. |
Speaking of which, I'm having white-screen issues with the M3. Are there any loaders on that, and if so, how do you disable them?
_________________
3 is not an "e",
7 is not a "t",
1 is not an "l",
And for the love of God,
Learn how to spell!
#62009 - pepsiman - Sat Nov 26, 2005 12:35 pm
| Empyrean wrote: |
| Speaking of which, I'm having white-screen issues with the M3. Are there any loaders on that, and if so, how do you disable them? |
M3 has a DS compatible loader, which will let you select an nds file to run when your passme2 works.
You just need to write the SRAM first.
#62010 - MaHe - Sat Nov 26, 2005 12:59 pm
| pimpmastah wrote: |
| Thx, but still the same. Does it matter I have a european MARIO?? On the backside of the passme is written "SM64 EUR". |
If you bought PassME2 made for USA version, yes it does matter.
#62103 - pimpmastah - Sun Nov 27, 2005 2:16 pm
Thanks guys.
All done. One DS repaired the other flashed. :-)