#63491 - pg65 - Tue Dec 13, 2005 5:18 pm
Does any one know if you can send supercard back to have it repaired? I have been able to test its sram with flash2advance but can't use it to write the firmware back on or even know if the SD adapter burned the card. I would like to see if this is possible before I replace the card with another. I have used the e-mail address on the website but have had a reply yet.
#63530 - groovadelickun - Wed Dec 14, 2005 1:10 am
You know... one of mine had some issues, and after opening it up, it had a trace that was not fully closed where the SD connector connects with the circuit board. I resoldered it, and it worked fine after that.
I've heard that the Supercard has had issues with poor solder jobs....
#63532 - pg65 - Wed Dec 14, 2005 1:47 am
that might be what happen it was harder to put the the SD adapter in then the SD card's. I will not be able to send it back 1 it is over 3 months and 2 I opened it.