#64314 - fun41 - Wed Dec 21, 2005 5:54 am
I was wondering, since I have gotten my M3 SD, I have no SD card to use from >_>... so I was wondering which is the best... or are able to run most things (from what I heard, some homebrew don't work with SD but CF it works).
Basically, I want personal opinions... not the PHWiki Site for M3, as some of the products aren't available over here. (Australia)
#64359 - Xgame - Wed Dec 21, 2005 6:19 pm
you can see here:http://www.gbarl.it/index.php?showtopic=10404
is a compatible list;
keep in mind: FUNZIONA, in green, is work; NON FUNZIONE, in red, is not work.
#64397 - leoedin - Wed Dec 21, 2005 11:49 pm
I believe the beginning of that list was taken directly from the M3 wiki Italian translation (The castlevania test was envisaged on the M3 wiki, and the numbers decided by a contributor.)
The Wiki can be found at http://leo.rampen.ca/m3wiki/index.php/M3 - the Compatibility list for SD and CF cards isn't as comprehensive as the one on that forum though - perhaps someone with knowledge of italian could update the wiki with some of those cards.
Leo
_________________
Yours Truly
my website
my blog
M3 Review
#64628 - Xgame - Sat Dec 24, 2005 1:41 pm
i' ve got an Panasonic Sd 512; but seems that can work only after e12 update.
can i use it for update o i must buy/get a new card for the update?
#64629 - G-SAS - Sat Dec 24, 2005 2:19 pm
Forget everything you read before! This is all fake!
I bought a Sandisk 256MB card today and it is working. After the firmware update my 512MB Toshiba card is working, too. Before the update it was not found by the M3.
DO NOT BUY KINGSTON. My Kingston Elite Pro (most expensive card ever) does not work!
#64633 - Xgame - Sat Dec 24, 2005 3:10 pm
then i can load the update file on my sd memory and update the M3?
#64634 - G-SAS - Sat Dec 24, 2005 3:13 pm
Yes, you need a sandisk sd card to update. later you maybe can use your panasonic.
#64642 - Xgame - Sat Dec 24, 2005 3:39 pm
if my card not work with update i'll buy a SanDisk Shoot & Store 32MB because is very cheap(64MB=9.99?!!). With those card can i update?
#64644 - G-SAS - Sat Dec 24, 2005 3:49 pm
I tried it with an 30? 256MB Sandisk card and know that 512MB cards do also work. I am not shure if smaller cards are working.
#64683 - Xgame - Sun Dec 25, 2005 12:40 pm
i' put the passkey in Ds slot with Matio 64 Ds(and i tried with NFSU2, also); the M3 with the updgrading file; i get 2 white screen. Is M3 break or the uncompatible card?