gbadev.org forum archive

This is a read-only mirror of the content originally found on forum.gbadev.org (now offline), salvaged from Wayback machine copies. A new forum can be found here.

DS Flash Equipment > Testing passme2

#67247 - zxr750j - Mon Jan 16, 2006 1:58 pm

Stupid question:
I bought a passme and flashed my DS. I build me a jtag cable and think I reprogrammed my passme to a passme2. But how do I know (without another DS) if I did it correctly?

#67255 - pepsiman - Mon Jan 16, 2006 2:32 pm

zxr750j wrote:
Stupid question:
I bought a passme and flashed my DS. I build me a jtag cable and think I reprogrammed my passme to a passme2. But how do I know (without another DS) if I did it correctly?

1) Insert PassMe.
2) Insert GBA cart with homebrew in GBA slot.
3) Hold Select during boot to disable FlashMe.
Homebrew runs = still PassMe1.
White screens = PassMe2 or broken.
4) Write SRAM to GBA cart.
2) Insert GBA cart with homebrew in GBA slot.
3) Hold Select during boot to disable FlashMe.
Homebrew now runs = PassMe2.
White screens = broken.

#67355 - zxr750j - Tue Jan 17, 2006 8:40 am

Step 3 gives white screens, there is hope!