#70808 - rethen - Wed Feb 08, 2006 10:36 pm
Hello, I've got quite a big problem. This afternoon I tried to reflash the Flashme (I had a v2 or so) in order to be able to play MK and use wifi with games. But when I was at 2%, the NDS rebooted itself, with unknown reasons.
Now it won't work anymore...
Is there any way to repair the firmware? Or do I have a new brick?
Thanks in advance...
#70810 - tetsujin - Wed Feb 08, 2006 10:44 pm
Did you try recovering with A+B+select+start?
_________________
---GEC
I think that all the work that's been done by the homebrew community so far to support people who want to program for the GBA or DS is amazing.
Thank you, everyone, I look forward to taking advantage of your work.
#70811 - rethen - Wed Feb 08, 2006 10:46 pm
Yes.. but it does nothing u_u
#70819 - tetsujin - Wed Feb 08, 2006 11:49 pm
What've you got set up on the GBA slot?
_________________
---GEC
I think that all the work that's been done by the homebrew community so far to support people who want to program for the GBA or DS is amazing.
Thank you, everyone, I look forward to taking advantage of your work.
#70820 - rethen - Wed Feb 08, 2006 11:57 pm
I'll explain the full process:
Firstly, I used wifime to install the flashme (like 3 months ago or so). And today, I wanted to update it, so I put the flashme v6 into my Ezflash II (after appending it to ndsloader.bin) and it starts all the process. When it reached 2% (after a long while trying) it died, for I think I pressed the power button unwillingly... so now it shall show nothing but a mere black screen in both of them.
On the GBA slot I currently have the flashme.nds.gba v6, installed into the Ezflash II..
#70828 - quadomatic - Thu Feb 09, 2006 12:43 am
it doesn't look like the failsafe installed for flashme then....i think u should look into trying ppflash if possible. I don't know a whole lot about that but i hear it worked for a few people around here.
#71050 - HyperHacker - Fri Feb 10, 2006 3:36 am
Does anyone know how high the percentage has to be for the failsafe to install?
#71055 - quadomatic - Fri Feb 10, 2006 4:01 am
i always thought i heard that the failsafe is the very first thing to install, but i guess 2% isn't quite enough to install the failsafe.
#71811 - zzo38computer - Tue Feb 14, 2006 5:32 pm
How do you replace the firmware in case there is no firmware left in the unit? Can you oopen it and fix it that way if it is really required? How?
#71844 - Sausage Boy - Tue Feb 14, 2006 9:10 pm
http://img433.imageshack.us/img433/4742/img1549small1no.jpg
That's how you do it. :P
_________________
"no offense, but this is the gayest game ever"