gbadev.org forum archive

This is a read-only mirror of the content originally found on forum.gbadev.org (now offline), salvaged from Wayback machine copies. A new forum can be found here.

DS Flash Equipment > FWNitro, NoFlashMe = Bricked DS :(

#77808 - Viral_Weaponry - Mon Apr 03, 2006 5:59 am

Ok, heres my problem: I installed FWNitro then I installed NoFlashMe, the numbers just appeared at 99% and then nothing... I tried shorting SL1, nothing again. There was no other way than turning off the DS. Then power button and *puff* 2 black screens and nothing else. I tried the button combination of A+B+Select+Start, nothing...
Note that the firmware installed before the NoFlashMe was FWNitro and not FlashMe.
I hope u guys can help me, because I am not good at the cable soldering...
Thank u in advance
_________________
MMF

#77862 - zzo38computer - Mon Apr 03, 2006 5:39 pm

I installed FlashMe before installing FWNitro, I don't know if that is what you need to get it to working
_________________
Important: Please send messages about FWNITRO to the public forum, not privately to me.

#77895 - m2pt5 - Mon Apr 03, 2006 10:55 pm

Does FWNitro have recovery code like Flashme?

If it doesn't, it should.
_________________
Don't sign your posts, it's dumb.

#77896 - MaHe - Mon Apr 03, 2006 10:57 pm

It does.
_________________
[ Crimson and Black Nintendo DS Lite | CycloDS Evolution | EZ-Flash 3-in-1 | 1 GB Transcend microSD ]

#77899 - olimar - Mon Apr 03, 2006 11:07 pm



Last edited by olimar on Wed Aug 20, 2008 10:23 pm; edited 1 time in total

#77909 - Viral_Weaponry - Tue Apr 04, 2006 1:10 am

the led doesnt blink, but it turns on. and the button combination doesnt work neither...

Fixed with a new board
_________________
MMF