#87034 - slinker - Sun Jun 11, 2006 4:46 pm
It worked fine. Just like before.
#87041 - vb_master - Sun Jun 11, 2006 6:34 pm
You are a very brave man.
_________________
Back.
#87047 - outphase - Sun Jun 11, 2006 6:55 pm
i flashed 3 of them this morning, the only problem was on my own DS where i was trying to find a good bridging tool. I ended up turning it off about 3 times with foil + toothpick at 4%. i used the recovery code with an M3 and it worked fine. i settled on a twisty tie with the wire stripped and it worked without any problems.
#87052 - lookout321 - Sun Jun 11, 2006 7:02 pm
I flashed my USA DS lite this morning..took about five minutes...USed v7 of flashme...however, the functionality of the light is now on/off...not the original DS lite function...
Any ideas? (my firmware was confirmed v7)
#87058 - teknicz - Sun Jun 11, 2006 7:21 pm
I just bought my DS lite an hour ago, and am looking to flash it after the battery has had an hour or so (I will keep it plugged in while flashing it). However, I can't seem to find a version of FlashMe v7, I believe the site is down or something?
I already have a copy of FlashMe v7 on my computer, but I'd really like to confirm if the one I have is the lastest version. Is there a checksum for the v7 file that somebody could tell me about? The one I have is 526kb (525 KB (538,185 bytes)).
#87063 - ObeyGiant - Sun Jun 11, 2006 7:39 pm
Yeah i cant find the latest flashme. >_<
#87090 - ratx - Sun Jun 11, 2006 9:49 pm
flashme V7 with lite support
http://tinyurl.com/h2cgf
fa220267edb05f4386025d97e2168f3f flashme.nds
d4521d1f86232d11ee63562393b630f9 flashme_stealth.nds
8cdfc84f6882e1a988b776753b3e6a67 noflashme.nds
#87093 - teknicz - Sun Jun 11, 2006 9:54 pm
I tried using the version of FlashMe I had in my computer already from when I flashed my old DS and it was a complete...
Success!
Everything works great, and I have the adjustable levels of brightness from the main menu.
Flashing it was a bit frustrating, I couldn't find the proper spot for the SL1 to short, so in desperation, I took off the insulating electrical tape and it finally worked. Might have been luck, but I thought I should put it out there for anyone having trouble flashing it.
Good luck to everyone else!
#88004 - Dracker - Fri Jun 16, 2006 11:03 pm
My md5sum (flashme.nds) 0762f6957fcfb3a942f2474a1a2383a2
This is V7 flashme from the day it hit the servers. Since this is different from the one above I bet it does NOT have lite brightness support.
#88006 - KidBomba - Fri Jun 16, 2006 11:11 pm
I dont understand why everyone is succesful flashing their dsLite.
I have a US DSLite, a passkey 2 dongle, mario kart ds game pak, a strange gba dongle that you put a nds game in that came with passkey and finally an M3 Perfect SD slim cart.
I"ve followed the stickes, and all the threads and all I read is success.
What am i doing wrong? I keep getting whiste screens after the safety warning on the original firmware. sorry for the multiple threads but I"m about to give up on this. My old DS wasnt such a pain in the ass :P
ok, i will be patient now and cross my fingers. Hopefulyl someone has the answer :)
#88036 - outphase - Sat Jun 17, 2006 3:40 am
are you setting up your passkey2 correctly? cause the white screens are because your passkey 2 isn't setup right
#88178 - HyperHacker - Sat Jun 17, 2006 10:53 pm
No, white screens mean the PassKey2 is working, but whatever code you put on the GBA cart isn't.
_________________
I'm a PSP hacker now, but I still <3 DS.
#88192 - outphase - Sun Jun 18, 2006 12:16 am
| HyperHacker wrote: |
| No, white screens mean the PassKey2 is working, but whatever code you put on the GBA cart isn't. |
Same white screens will happen if you put a passme1 in a v4+ DS