#87156 - santos - Mon Jun 12, 2006 10:45 am
Hi. At insertion DS Lite Flash Me it was switched off on 1 %. Recover
does not help (pressing of combinations of keys A, B, Start, Select).
What it is possible to undertake still? ppflash will approach to DS Lite? The Scheme of soldering and connection same?
I shall be grateful for the help.
#87162 - Grey - Mon Jun 12, 2006 1:18 pm
I don't have any links or what have you handy, but I read over on scdev.org that the easiest way to recover is with a 2nd ds lite: open em both up, take the good bios (it's socketed in the lite) and put it into the bad, boot up flashme with your pass device, take out the good bios and put in the bad, start the flashme sequence.
Depending on if you've burnt your fuses you may need to short those.
You'll obvioulsy want to go root around on the scdev.org forums, register because some of the forums are not visible to unregistered people.
#87228 - santos - Mon Jun 12, 2006 7:24 pm
Thanks for the answer. Yes probably a variant with the second DSL the most preferable. At me have arisen still pair questions:
1. DSL which it was not stitched - "Japan". If the second will be
"American" they will understand each other?
2. When I include DSL - burns the green indicator. It means, what safety locks by way of?
#87236 - CubeGuy - Mon Jun 12, 2006 8:05 pm
Swapping the Flash chips would be the easiest. But next time you go to flash you Lite, wrap your flashing tool with electrical tape before inserting it into the SL1 hole.
_________________
It's 'CubeGuy.' One word. No space.
#87242 - Grey - Mon Jun 12, 2006 8:34 pm
1) It doesn't matter where the DS Lites are from, it'll work.
2) Not sure what you mean exactly by the green light... have your tried the flashme failsafe key combo yet?
#87257 - MaHe - Mon Jun 12, 2006 10:11 pm
Ugh, I think he is using a machine translator for the posts :P
_________________
[ Crimson and Black Nintendo DS Lite | CycloDS Evolution | EZ-Flash 3-in-1 | 1 GB Transcend microSD ]
#87596 - CubeGuy - Wed Jun 14, 2006 6:57 pm
Didn't Moonshell use a machine translator for his posts? Even his were easy to understand after a while.
_________________
It's 'CubeGuy.' One word. No space.
#87800 - HyperHacker - Thu Jun 15, 2006 7:14 pm
Moonlight used a good translator. ;-)
_________________
I'm a PSP hacker now, but I still <3 DS.