#61957 - bafio - Fri Nov 25, 2005 8:50 pm
Hi eveyone,
I have a Realtek 8180, and installing the drivers and utility program from the site, you have an option to use the card in Access Point mode.
You can set SSID, WEP key and see the association table.
Problem: I can't get it to work with WIFI games!
I have other options:
Beacon interval (100)
DTIM period(3)
Preamble mode(auto,short or long)
Data rate (auto,1-11 mbp)
Security; Open,shared key (Open)
I have tried any combination of the settings (But not for the Beacon interval and DTIM period), but same results:
No access point
When I try to connect I can see fron the statistics that packets are coming from the nintendo, but the get as RX CRC error (0-500)
Anybody with the same hardware got it to work? Or any idea ofthe proper settings, in particular
Beacon interval (100)
DTIM period(3)
Thanks
Fabio
PS. I can also set the channel (tried some channels already)
Last edited by bafio on Sun Nov 27, 2005 8:16 pm; edited 2 times in total
I have a Realtek 8180, and installing the drivers and utility program from the site, you have an option to use the card in Access Point mode.
You can set SSID, WEP key and see the association table.
Problem: I can't get it to work with WIFI games!
I have other options:
Beacon interval (100)
DTIM period(3)
Preamble mode(auto,short or long)
Data rate (auto,1-11 mbp)
Security; Open,shared key (Open)
I have tried any combination of the settings (But not for the Beacon interval and DTIM period), but same results:
No access point
When I try to connect I can see fron the statistics that packets are coming from the nintendo, but the get as RX CRC error (0-500)
Anybody with the same hardware got it to work? Or any idea ofthe proper settings, in particular
Beacon interval (100)
DTIM period(3)
Thanks
Fabio
PS. I can also set the channel (tried some channels already)
Last edited by bafio on Sun Nov 27, 2005 8:16 pm; edited 2 times in total