#151128 - sonny_jim - Tue Feb 19, 2008 3:38 pm
I've just put together a test build that should be able to access both slots. It's not very elegant at the moment but it should work. It works by using the old drivers in the DSLinux kernel back when DLDI didn't exist.
Boot from Slot-1 with either a M3SD, GBAMP, Supercard SD or Max Media Drive (maybe) in Slot-2. Slot-2 will be mounted automatically on boot to /var/slot2. You may see some error messages but it should mount fine. To check, type:
If it's worked, you should see both /dev/dldi and /dev/mmcblk entries.
I've only tested this with an Acekard + Supercard SD and it seems to work fine although I do lose 16MB off the SCSD RAM.
Your mileage may vary, use at your own risk and so on:
http://rapidshare.com/files/93148980/dslinux-r2130-BothSlot-dldi.tgz.html
Original post on DSLinux forums
Last edited by sonny_jim on Tue Feb 19, 2008 4:14 pm; edited 1 time in total
Boot from Slot-1 with either a M3SD, GBAMP, Supercard SD or Max Media Drive (maybe) in Slot-2. Slot-2 will be mounted automatically on boot to /var/slot2. You may see some error messages but it should mount fine. To check, type:
Code: |
mount |
If it's worked, you should see both /dev/dldi and /dev/mmcblk entries.
I've only tested this with an Acekard + Supercard SD and it seems to work fine although I do lose 16MB off the SCSD RAM.
Your mileage may vary, use at your own risk and so on:
http://rapidshare.com/files/93148980/dslinux-r2130-BothSlot-dldi.tgz.html
Original post on DSLinux forums
Last edited by sonny_jim on Tue Feb 19, 2008 4:14 pm; edited 1 time in total