#133 - lazyboy - Fri Jan 03, 2003 8:13 pm
I seem to have lost my installation disc, so if anyone can tell me where i can find drivers for WindowsXP Pro. i will thank him.
PS
I have the USB enabled model.
#146 - Banjo - Fri Jan 03, 2003 10:57 pm
#174 - lazyboy - Sat Jan 04, 2003 10:09 am
Thanks Banjo!
And only one more request: Where can i find the send tool of the linker?
The link from this site doesn't work.
And many thanks agian!
#184 - lazyboy - Sat Jan 04, 2003 9:49 pm
WOW, 67 watced this thread, only one helped!
I'm sure that someone has the send tool of thw USB MODEL (Extreme)
so no one can't send it to me?
#186 - SimonB - Sat Jan 04, 2003 10:08 pm
looking at www.flashadvance.com I found:
http://61.10.196.46/gbalinker/downloads/images/ExtremeV125.zip
its a 16Mbyte file. if you are on a dial up connection I can remove all
the stuff from the .zip that isnt really needed (adobe acrobat reader, lots of gba demos etc). that should get it down to 3-4MB
EDIT: ok Ive removed the stuff and the file is just 1.7MByte now so even
if youre on a fast connection you might prefer this:
http://gbadev.org/files/ExtremeV125_no_acrobat_or_demos.zip
the drivers you wanted can also be found on that site, but you have them
now i assume?
Simon
Last edited by SimonB on Mon Jan 06, 2003 5:16 pm; edited 1 time in total
#269 - lazyboy - Sun Jan 05, 2003 8:11 pm
SimonB
Thanks for helping though now the Send tool doesn't work at all!
The software itself works, but it just doesn't recognizes the flash itself...
#282 - lazyboy - Sun Jan 05, 2003 10:18 pm
Ok i tried it with 1.25 and 1.20 versions, both didn't work!
if anyone could help me find an older version thar supports USB? like probably the one that came on my lost CD?
and thanks agian
#300 - MHz - Mon Jan 06, 2003 2:37 am
Well, I have a file named "XtremeLink1_05b.zip"... Could that be of any interest to you? If so, I could send it by mail if you want (don't have a good www place to put it at the moment)? The size is 670KB...
#1169 - Shark75 - Wed Jan 15, 2003 10:42 am
Would you be so kind as to send me the old drivers too, as I can't get my Xtreme to work fully either with 1.25.
Thanks.
(shark75@lineone.net)
#1204 - lazyboy - Wed Jan 15, 2003 6:23 pm
Everyone thanx for helping! i just installed diffrent drivers and it works grate now! thanx!!!!!!!
#1215 - Shark75 - Wed Jan 15, 2003 7:06 pm
Please could you send me whatever drivers it is you are using with it working now? (shark75@lineone.net)
#1731 - Cryptics - Wed Jan 22, 2003 4:24 am
i was wondering if i could get those drivers / progs etc too, PM me any links etc... or rather, can i get some help cuz the drivers / software wont detect the stupid linker..
#1740 - Shark75 - Wed Jan 22, 2003 10:07 am
I eventually found the 1.05 drivers, but they didn't help, in fact they made things worse and I couldn't even write at all without it effing up.
At least with 1.25 all you have to do is leave it unplugged whilst your not using it and then plug it in when you want to use it and it will be fine.
I'm going to get a parellel cable and power adapter anyway, cause this is bloody ridiculous and I've heard that that method works all the time. Sort of misses the point why I bought the USB version in the first place, but at least this way I get a working solution all the time and don't have to fiddle.
#1784 - Cryptics - Thu Jan 23, 2003 2:26 am
parallel port? wth, where am i going to get the power supply? spend more money etc? man
#1790 - tepples - Thu Jan 23, 2003 4:48 am
| Cryptics wrote: |
| where am i going to get the power supply? |
The old Visoly linker needs -9V DC at 500 mA. (I'm reading that off my old linker's AC adapter; I don't know if that's changed with the new linker.) RadioShack (or your local equivalent) sells universal AC to DC adapters with several connectors; at least one should fit.
_________________
-- Where is he?
-- Who?
-- You know, the human.
-- I think he moved to Tilwick.
#1801 - Shark75 - Thu Jan 23, 2003 10:14 am
It tells you everything in the UserGuide pdf file you get with the 1.25 software. 500mA 9v power adapter and parellel cable is a DB25 male to male, which I think is more commonly known as a Null Modem cable. (Somebody correct me if I'm wrong)
#2232 - Wanderer - Fri Jan 31, 2003 2:09 pm
Just to let any curious folks know, I have V1.05beta running pretty well under XP.... things tend to take a turn for the worse though if I run an emulator at the same time though (I'm guessing it takes up too much CPU time causing a communication failure).
I downloaded the SW and drivers from http://www.gameboy-advance.net/fal_soft/flash_advance_software.htm
Wanderer.